Hemet, CA · California license 1137822 · C-8 Concrete
(951) 533-8821
Home
Services
Services
Residential
Commercial
Service Areas
Service Areas
Riverside County
San Bernardino County
Orange County
Los Angeles County
San Diego County
Kern County
GalleryAboutBlogContactCall (951) 533-8821
Skip to content
Crew portrait basement
Residential

Backyard Concrete

Backyards get built in pieces over years and end up mismatched, with water running the wrong way. Planning the whole yard first means one finish, one drainage scheme, and joints that line up.

Hemet, CA  ·  (951) 533-8821  ·  License 1137822

Talk to us about the job
Crew raking pour
Colored pad set entry hires
Driveway side return hires
Floating step pads
Sidewalk rebar grid
Slab yard shadow
Slab pale new build
Slab formed backyard
Slab behind house finished
Foundation mat rebar
Sequence

How the job runs

Step 1

Start with a site visit

No number gets quoted before somebody stands on the job. Soil, slope, access and drainage change the work more than square footage does.

Step 2

Tell you straight

We are direct about what we find. That includes telling you when a cheaper fix is the right one, and when a slab is past saving.

Step 3

Prepare what is underneath

Excavate to grade, deal with anything soft, and build compacted base. Almost every failure we get called to started here.

Step 4

Place and finish

Forms that hold their line, steel placed to the drawing, concrete consolidated, and finishing timed to the slab. Thirty two years in the trade is largely knowing when to start.

Specifics

What this job actually needs

What decides the price

Access, thickness, the state of the base, how much demolition there is, and the finish. Square footage is the least interesting number. That is why somebody comes out and stands on the job rather than quoting off a photograph.

Base preparation

Cut to grade, find and fix the soft spots, place base in controlled lifts and compact it. Almost every residential slab failure we are called to look at started here rather than in the concrete.

Reinforcement and joints

Steel lifted into the upper part of the slab where tension happens, and control joints spaced to the thickness and cut early enough to work. Those two decisions are why some slabs look fine at twenty years and others are a map of cracks at five.

Curing in inland heat

Low humidity, wind and triple digit afternoons pull water out of a fresh slab faster than the concrete can use it. Curing is an active step here, not something that just happens, and it decides the strength of the surface.

What decides whether it lasts

Concrete is judged on the surface and it fails from underneath. The base, the steel, the joints and the cure are the whole job. A slab that was poured on bad ground will tell you so, usually in the third or fourth year.

Why fourth generation matters here

32 years on the tools means most of these problems have already been seen once. Reading a slab before quoting it is the part you cannot learn from a book, and it is the difference between a repair that holds and one that comes back.

Local conditions

What Southern California ground does to backyard concrete

Irrigation against the slab

Almost every valley property waters something, and sprinklers running along a slab edge keep the base saturated year round. In expansive soil that is a slow way to undermine your own driveway. Where the water lands is worth looking at before blaming the concrete.

Older flatwork around here

A lot of valley concrete was poured thin, with light reinforcement, on a base that was never properly compacted. When it fails it is usually reporting on the ground rather than on the mix, and that is the difference between a repair that holds and one that comes back in a year.

Drainage on a flat lot

Valley lots are often close to level, which makes slope hard to find and easy to get wrong. Low points, cross-fall and where water actually leaves the property get worked out before the pour, because once the concrete is down the drainage is permanent.

What lasts here

A properly based, properly jointed slab with reinforcement sized to the load will outlast the house it sits beside. The variables that decide it are all underneath and all invisible once the pour is done, which is exactly why they get cut on cheap jobs.

Our work
Crew screeding pour
Crew troweling edge
Trowel edge aggregate
What goes wrong

How concrete fails, and why

Settlement at the apron

The strip where a driveway meets a garage takes every vehicle and sits over backfill that was disturbed during construction. It settles more than the rest of the drive and it needs its own thickness and joint.

Heaving

A slab pushed upward is usually roots or expansive soil taking on water. Both get worse with irrigation, and neither is fixed by resurfacing the top.

Pop-outs

Small conical craters come from a particle of reactive aggregate near the surface expanding and blowing the concrete off above it. Cosmetic, and a repairable surface defect.

Dusting

A surface that chalks under a broom was finished or cured badly, or had water worked into it. Sealing helps; grinding and resurfacing fixes it.

What to expect

How a job runs

What a site visit covers

Soil, slope, drainage, access, existing concrete, and what you actually want the space to do. All of it changes the work.

Ordering the concrete

Mix design comes off the application. Strength, aggregate size and admixtures are decisions, and they are made before the truck is booked.

A repair aimed at the wrong cause is money spent twice.
On repair work

Placement and finish

Placed, consolidated, screeded, floated and finished, each at the right moment. That timing is the trade.

Living with it

Keep water moving off it, reseal when it needs it, and keep an eye on the joints. That is most of concrete maintenance.

Related

Other residential work

Driveway rebar dusk

Concrete Driveways

The slab that carries a car every day of its life.

Driveway rebar formed

Concrete Driveway Replacement

Out to the dirt, rebuilt from the base up.

Driveway side approach

Concrete Driveway Repair

Fix what is broken and leave what is sound.

Driveway side return 2

Concrete Patios

The outdoor room that starts as a flat pour.

Driveway wide new build

Concrete Patio Replacement

Take out the old slab, pour the one you actually wanted.

Garage approach rebar

Concrete Patio Repair

Cracks, settled corners, and surfaces that have gone rough.

Pad formed sidehouse

Concrete Walkways

Getting from the street to the door without a trip hazard.

Porch slab modern home

Concrete Sidewalks

Public-facing flatwork built to the spec the city will inspect.

Straight answers

How much does concrete cost?

It depends on access, thickness, base condition and finish, which is why we walk the job before giving a number. We will not quote a driveway off a photograph.

How long before I can drive on a new slab?

Concrete takes most of its strength in the first week and keeps gaining for a month. Foot traffic is usually fine after a day or two. Vehicles wait longer, and we will give you the actual number for your pour, because thickness and weather both change it.

Do you fix the base or just pour over it?

We fix the base. Pouring new concrete on ground that already failed once is how you get the same crack in the same place. If the base is the problem, that is the work.

Can you match my existing concrete?

Usually close, rarely exact. Concrete changes color as it ages, so a new pour next to a ten year old slab will read newer for a while. We match thickness, finish and joint pattern so it looks intentional.

Will it crack?

Yes, eventually, and that is the material rather than a defect. The job is deciding where. Control joints put the crack on a line we cut instead of one it picks. A slab with no cracking plan will still crack, just somewhere you did not want.

Tell us what the job is

We walk the job, tell you what it needs, and give you a number. Hemet and roughly 100 miles around it.